The Davies Multipro 3 with Hydrogenie 3.1 controller is a pump system designed to provide high pressure water flow in a variety of settings. It features a maximum pressure of 12Bar and can operate in temperatures ranging from -0 to +60ºC. The connection thread is 1” male.
One of the key features of this pump is its adjustable cut in pressure, which can be set to 1.5, 2.0, or 2.5Bar via the control panel. Depending on the user set cut in pressure, the minimum pump pressures are as follows: 1.5Bar = 3.0Bar, 2.0Bar = 3.5Bar, and 2.5Bar = 4.0Bar.
Another useful feature of this pump is its 24Hr Anti-Jam function. If the pump remains idle for 24 consecutive hours, the controller will run the pump for 5 seconds to prevent it from jamming. This helps to ensure that the pump is always ready to use and that it remains in good working condition over time.
Overall, the Davies Multipro 3 with Hydrogenie 3.1 controller is a powerful and versatile pump system that is suitable for a wide range of applications. Its adjustable cut in pressure, automatic reset/restart, and 24Hr Anti-Jam function make it a reliable and easy-to-use option for those in need of high pressure water flow.
Pump Features
● 304 Stainless steel impellers, Diffusers, seal plate & Pump casing
● 303 Stainless steel pump shaft
● Quiet & Low running cost
● Offset suction for improved suction ability (3S & 5S models only)
Typical Applications:
● House and farm water supply
● Pressure boosting
● Water treatment
● Industrial circulation
● Hot water cleaning systems
Operation limitations:
● Maximum ambient temperature: +40ºc
● Liquid temperature range: -15ºc to + 110ºc
● Maximum operating pressure: 8.5bar/125PSI
Controller Features
- Max pressure: 12Bar
- Operating temperature range: -0 to +60ºC
- Connection Thread: 1” male
- Minimum pump pressure: 3.0Bar
- Automatic reset/restart following run dry: If the pump runs dry the controller will attempt to re-prime 10 times over 24 hours, each attempt lasting 5 seconds.
- 24H Anti-Jam function: If the pump remains idle for 24 consecutive hours the controller will run the pump for 5 seconds to prevent the pump from jamming.
Supplied With
- Pre-wired Hydrogenie 3 Auto controller with pressure gauge
- Connection union
- Brass tee
