Introduction
The HydroGenie 8 is an electronic pump controller that uses a variable frequency inverter, pressure transducer, and flow sensor to manage single or three-phase pumps up to 10A 2.2Kw (3.0Hp). It maintains constant pressure, protects against run-dry failure and overload, and has a soft start/stop feature that prevents water hammer and increases motor life. By operating the pump only when necessary to maintain the set pressure, it also saves energy. The HG8 can be used as a master/slave controller for two pumps or in a group of up to four units with communication via a central device. Its control panel with push buttons, LED indication lights, and an LCD screen makes setup and operation easy and intuitive.
Technical Features:
Rated motor power: 0.37-2.2Kw
Supply Voltage: 1~ 230V
Output Voltage: 1~ 230V/3~ 230V
Frequency: 50-60Hz
Max. Current per Phase: 10 A (~3 230 V) / 9A (~1 230 V)
Max. Peak Current: 20% for 10s
Fuses: 20A for inverter and 10A for main supply.
Protection: IP55*
Max. Water Temp/Ambient: 40 ºC /50 ºC
Max. Set pressure: 12 Bar
Max. Operating pressure: 15 Bar
Max. Flow: 15,000 L/H
Hydraulic Connection: 1.25” Male Net Weight: 3.3kg
* Dependent on cable glands being installed correctly
