Overview:
PRESSCONTROL is a device that guarantees optimal control of pumps for domestic use. Deriving from a hydraulic and electronic logics project for the Australian and New Zealand market, it is capable of simultaneously detecting both the pressure and the flow, as well as automatically managing the pump operation. It replaces the traditional pressure controller and pressure tank, protecting the pump in the case of water shortages.
PRESSCONTROL:
– Starts and stops the pump in accordance with the opening and closing of the taps
– Maintains constant pressure during delivery
– Stops the pump in the case of water shortage, protecting it from dry running
– Maintenance-free
CEG’s PRESSCONTROL Adjustable Electronic Flow Regulator has many features such a flow sensor/check valve which is manufactured from high grade brass, adjustable cut in pressure which has an adjustable screw dial to set cut in pressure, range 1.5-3.0 bar. The product offers a pressure gauge for easy monitoring of pressure. It has a electronic circuit board with built in surge and spike protection. Featuring run-dry protection with LED display and reset button. It also offers a 3 pin single phase plug with a 1.5 meter lead to suit AS/NZ standards. The product has Connection terminals for easy connection to your pump.
Installing a small 3L pressure tank after the pump in conjunction with the PRESSCONTROL in the system is recommended. This reduces water hammer and pump start and stop cycle, increasing the operating life of your pump saving up to 15% on your pump running cost.
Features:
- Water temperature range: 5-40°c
- Maximum working pressure: 10 bar
- Factory Set Start Pressure: 2.0 bar
- Adjustable Start Pressure Range: 1.5-3.0 bar
- Voltage: 220v-240v
- Maximum Wattage: 2400W
- Maximum Current: 10A
- Inlet/Outlet Connections: 25mm (1″) BSP
- Software Version: 5.0
