Description
**Note: Dry running of the pump (operation without pumped medium) over a period of more than 20 minutes must be avoided.**
The Simer 5 is a robust submersible utility pump for draining cellars, flat roofs, tennis courts, or swimming pools. It can also be used to remove wastewater from building works such as core-hole drilling and concrete cutting.
The Simer pump removes unwanted water quickly and efficiently, leaving a residual water level of just 2 mm while starting to pump at a water level of just 5 mm!
The removable strainer, with a mesh size of 2 mm, reliably protects the hydraulic system from coarse solids. The variable hose connector allows connections to be made quickly and easily.
Connecting the pump permanently to the building’s drainage system or using it to protect against back-flow is not permitted, however. Please refer to our U3K to U6K range of pumps for these types of applications.
The electronic switch Simer Level Control can be integrated into the cable inlet and switch the pump on automatically at approx. 7 mm water level. This way, puddles, and flood water are removed automatically.
Key Features
- Removes water down to a level of 2 mm.
- Robust cast aluminum housing.
- Manual pump - self-venting. Can operate at a water level of 5mm.
- Suitable for continuous operation.
- Replaceable cable inlet.
- Maximum head – 6 m.
- Maximum flow – 62 pm
Pump Construction and Materials
Vertical, single-stage, submersible, strainer with 2 mm mesh, spiral casing with hose connections of ½“, ¾“, and 1“. Hydraulics driven by dual blade open impeller.
- Pump casing: Aluminium – stove enameled.
- Impeller: Die cast zinc.
- Strainer: Plastic.
- Seal: Mechanical seal.
Operating Conditions
Drainage pump for the disposal of faecal-free waste water, including rainwater and lightly polluted water.
