Davies Cast Iron Jet 61 Pump

The Davies Cast Iron JET series pumps with their proven reliability and excellent self-priming ability make them a valuable asset to any house or farm water supply system. Jet/venturi design allows suction lift up to 8m – great for drawing from rivers, dams & ponds, shallow wells/bores and underground tanks. Easy to prime and handle suction air leaks. Rugged cast iron pump casing for greater strength.

• Max pumped liquid temperature: 60°C.
• Max ambient temperature: 40°C.

MOTOR FEATURES:

• Asynchronous, squirrel cage type, enclosed with external cooling.
• Overload protection: Single phase version incorporates auto-reset overload protection, Three-phase versions require overload protection supplied by the user.
• Insulation: Class F.
• Duty: S1.

CONSTRUCTION MATERIALS:

• Pump body: cast iron G20.
• Motor bracket: Die-cast aluminium (cast iron for JET152-302 series).
• Nozzle & venturi tube: Technopolymer.
• Diffuser: Techno-polymer for JET61-83, Cast Iron for Jet103-302 series.
• Impeller: Techno-polymer for JET61-83, Stainless Steel for Jet103-123, Stamped brass for JET152-302 series.
• Pump shaft: AISI 420F Stainless steel for JET61-122, AISI 304 for JET152-302 series.
• Mechanical seal: Carbon ceramic.

The Davies Cast Iron JET series pumps with their proven reliability and excellent self-priming ability, combined with a Hydrogenie 1 or 2 controller for complete pump control and protection makes them a valuable asset to any house or farm water supply system. Jet/venturi design allows suction lift up to 8m – great for drawing from rivers, dams & ponds, shallow wells/bores and underground tanks. Easy to prime and handle suction air leaks. Rugged cast iron pump casing for greater strength.

SUPPLIED WITH:

• Connection union
• Pre-wired Hydrogenie 1 or 2 controller

CONTROLLER FEATURES:

HydroGenie 1

• Max pressure: 10Bar
• Operating temperature range: -0 to +60ºC
• Connection Thread: 1” male
• Minimum pump pressure: 3.2Bar
• Maximum pump pressure: 10Bar

HydroGenie 2

• Max pressure: 12Bar
• Operating temperature range: -0 to +60ºC
• Connection Thread: 1” male
• Minimum pump pressure: 3.0Bar
• Automatic reset/restart following run dry: If the pump runs dry the controller will attempt to re-prime 10 times over 24hours, each attempt lasting 5 seconds.
• 24H Anti-Jam function: If the pump remains idle for 24 consecutive hours the controller will run the pump for 5 seconds to prevent the pump from jamming.